Preparation Tips on How to Wax a Car with a Buffer Materials Equipment. How to Wax a Car With a Buffer Learning how to polish a car with a buffer greatly reduces the amount of total waxing time and gives your car the same showroom gleam it had when you saw first saw it.
The buffer should have a wax applicator pad.
How to wax a car with a buffer. Now swap the buffers wax applicator for a microfiber cloth and if you can a special wax remover microfiber. Attach the wax applicator to the buffer pad of your machine buffer. Do not turn on the buffer yet.
Car polish is a mildly abrasive liquid applied before wax to enhance the paints smoothness and sheen. Turn on the buffer and allow it to glide across the section you are waxing. Apply the wax in a circular motion.
It is very important not to turn on the buffer just yet. Then take a clean microfiber towel and use circular motions to remove the dried wax. FINISHING STEPS Step 1.
This will save you time and energy on the waxing process. Apply the polish to a soft cloth or the pad of your orbital buffer and rub it in a circular motion on the car. The best kind of buffer to use would be random orbital buffers as they spread the compound simultaneously in 2 different ways.
Many people dont realize the importance of waxing their car to protect it. Use this to buff off the dried wax using long smooth strokes. Final Pro Tips Wax a Car With a Buffer Always use a clean polishing pad every time you use your buffer Store pads in an airtight container or sealable plastic bag to prevent contamination After use wash the pads well in hot water Or if you prefer you can buy new pads whenever you plan to polish.
Once you are happy with the coverage you can quickly move on to the next section of the car. Put the wax applicator over the pad on your buffer. Attach it to the buffer and put a small amount of wax on the center of the pad.
Apply the first layer of wax gently with the buffer still off. Allow the wax the dry for a couple of minutes then use your sander or buffer with a buffing pad to buff the surface smooth. Switch on the polisher to a slow speed setting and work the wax over the paintwork in a sweeping motion using very light pressure making sure even and full coverage on the surface.
When you have a finished a section wait for approximately 10 minutes until the wax has set fully. What Is Car Wax. Start by applying gentle pressure to the cloth and using a circular motion to remove the majority of the wax.
Once wax is thoroughly spread over a single area of your vehicle turn on the machine and allow it to gently glide and buff the wax. If youre using an orbital buffer turn it on after youve used the pad to rub some of the polish on the car to prevent splattering. Apply the wax to the orbital pad before you turn the buffer on as these tools can be used on both the buffing stage and applying stage.
This may seem like common sense especially given how. Now Get Ready to Wax Your Car with a Buffer First thoroughly wash your vehicle to remove all of the dirt. Then without turning on the buffer apply wax to your car using vertical or horizontal linear movements.
Lastly turn the buffer on and use it to apply wax gently all over your cars surface. Having all the items you need beforehand will save you from stopping halfway through the job to.
