When applying the paint make sure you work inward to cover the entire spot completely. Process of Fixing Paint Chips.

Do It Yourself Repairing Paint Chips

Clean the area with soap and water then rub down with alcohol or white spirit.

How to touch up paint chips on car. Figure out the exact paint color on your car. Smaller spots should be done with a matchstick instead of a paint brush. If the damage is only a deep scratch or a tiny spot you may need just a dab of rust arrestor to stop the rust from continuing to form under the new paint.

Prepare the vehicle by ensuring the surface being treated has been thoroughly cleaned and dried. Clean it with some soap and water and dry it gently with a soft cotton cloth. When you apply metallic car paint with a touch up pen or brush the metallic flake in the paint will not lay down correctly.

If the car has suffered road rash lots of small paint stone chips in one area put the paint onto a fingertip of the glove and smear evenly across the road rash making sure they are all filled. Repeat this process until the paint covers the entire primed area. Use a small piece of 220 sandpaper to rough up the surface so that the primer adheres properly.

Keep doing this until your swab comes up clean. Wash the area thoroughly. Apply the touch up car paint.

Sand the spot carefully. For a DIY car paint chip repair job on metallic paint or chips larger than a dime you will want to use automotive spray paint. So in this video I show you the absolu.

Even if there is a perfect paint match the paint chip repair will look darker. Make sure the paint isnt too thick for the area that you are working with. Dont get in a hurry on thispaint needs considerable time to fully dry and drying time may vary according to temperature and humidity.

Apply the touch up paint to the primer. Next rinse the rust remover out. Use a total of three or four thin coats of touch-up paint letting each coat dry for 20 minutes.

Apply the touch-up car paint onto the damaged area using either the Chipex paint. This step is vital to remove grease and give the paint a good surface to adhere to. Allow the paint to dry between coats.

Shake the paint Step 1 Paint bottle well and then use the supplied Chipex paint applicator brush to dab the paint onto the chipped areas. PaintCraft owner Steve Bode repairing paint chips on a hood. The first step is to fill up the pens reservoir with your touch-up paint then tap the tool against a hard surface to get the paint down to the ultra-fine brush at the bottom.

Take your time and follow the touch up paint instructions that come on the bottle. Get damage repaired before it gets worse. Buy a matching touch-up paint color.

If there are any ragged edges around the paint chip consider using some automotive polishing component over the paint chips to soften them. Dab the applicator brush in the paint then touch it to the center of the chip and allow the paint to settle evenly. Add a second coat of paint and let it dry for 20 minutes.

Using the same method as you might for a medium-sized chip apply the touch up paint to the primer. The first step is to clean the paint chips thoroughly so you can start working on them. Here are our step-by-step instructions.

We all have suffered from paint chips before and it sucks that you start to see your car get damaged by road debris. You can also look on the car for the code if you cant find it. How to Use Touch Up Car Paint 1.

When removing stone chips it takes time a close paint match and a steady hand. Using a small brush or spray paint apply several coats of touch-up paint to build up the repaired area so its slightly higher than the paint surrounding it. Let the primer dry for at least a half hour.

Swab CLR Ultra Ones Safest Rust Remover or an equivalent rust remover into the chip to dissolve and remove rust. Use a small soft paint brush to apply a thin coat of paint. Priming and Painting Chipped Areas 1.

Go to your local auto parts store or contact your car dealership with your paint. Let the paint dry for 20 minutes. If youre unable to wash the car right away just pour water on it and wipe it with a wet paper towel gently and with plenty of water.

Apply the Primer Fill the area within the car paint chip just touching the edges of the surrounding paint.